Lefty guitar parts
If you reached this page via an Internet search engine please note:
A frame set with links to all our different sections should appear on the left of the screen.
If it's not there, log off and use: File/Open "www.GRGuitars.com"

Table of Contents
All products specifically for left-hand guitar are listed on this page.

See Hardware, Strat & Tele pages for parts that fit
both right and left handed instruments
.
Please tell all your left handed musician friends to visit GRGuitars.com
Liquidating lefty parts listed below.
Many are 1 only, all sales final, sorry, no returns.
Minimum order $10

Updated July, 2018
BN206-LTx
Lefty curved slotted bone nut for Fender style guitars.
3 left
3.95
BN2219-LTx

Lefty slotted nut for Fender style guitars-Tusq material, curved style. A littler easier to install yourself than the bone nut.
List $12.50 3 left
1 11/16" x 3/16" x 1/8"
To purchase unslotted nuts, see Table of Contents for page devoted to brand and/or style of guitar
5.95
BN2219-LoGx

Lefty slotted nut for Fender style guitars-Black tusq material, curved style. A littler easier to install yourself than the bone nut.
List $12.50 2 left
1 11/16" x 3/16" x 1/8"
To purchase unslotted nuts, see Table of Contents for page devoted to brand and/or style of guitar
4.95
BN2227LTx

Lefty slotted nut for acoustic guitar-tusq material. List $12.50
1 23/32" x 3/16" x 11/32"
4 left
5.95
BN2227LTx
1 only
Lefty slotted nut forJumbo acoustic guitar-tusq material. List $12.50
1 11/16" long x 3/16" x 11/32"
1 left
7.95
BN2804-LTx
Lefty slotted bone nut for Gibson style guitars.
1 left
4.95

All hardware specifically for left-hand guitar is listed below

SB2049-202LAx
aged
Lightly aged Lefty Gold Fender brand Strat bridge-#099-2049-202. Original '62 reissue-vintage style 6 saddles are stamped "Fender." Steel block, includes trem arm, claw, screws & springs. 1 left
$159.95
SB17GLx
Lefty gold tremolo arm for USA Strat, white tip. Won't fit import models.
3 left
5.95

GWTANL

 

As New,
with dome knobs

Lefty Wired Tele control plate assembly-Chrome Fender control plate with mounting screws, 2 chrome dome knobs, 3-way switch, black barrel switch knob, 2 CTS 250k solid shaft pots, cap, cloth wire, and 1/4" Switchcraft jack. Pickup connection wires clearly marked. 1966 schematics used unless otherwise requested. Order input cup seperately, below.
87.95

GWTANB

 

As New,
with flat top barrel knobs

Lefty Wired Tele control plate assembly-Chrome control plate, 2 chrome flat top barrel knobs, 3-way switch, black barrel switch knob, 2 CTS 250k solid shaft pots, cap, wire, and 1/4" Switchcraft jack. Pickup connection wires clearly marked. 1966 schematics used unless otherwise requested. Order input cup seperately, below.
88.95

GWTAAL

aged metal

Lefty Lightly Aged Wired Tele control plate assembly with lightly aged hardware. Aged chrome control plate with mounting screws, 2 aged chrome barrel knobs, 3-way switch, black switch knob, 2 CTS 250k solid shaft pots, cap, cloth wire and 1/4" Switchcraft jack and aged input cup with clip. Pickup connection wires clearly marked. 1966 wiring diagram used unless otherwise requested. High hat switch tip may be substituted for barrel type and dome knobs instead of barrel-by request.
108.95

LT-Hrdkit-N

Flat top barrel knobs may be subbed for dome knobs. Email request referencing order #

Lefty chrome/nickel hardware kit for Tele style guitar. Includes Tele bridge #TB5125-CMP-NL, nickel string ferrules, lefty nickel kluson tuners, Chrome or nickel control plate with screws, two dome or barrel knobs, input cup, nickel strap buttons, chrome or nickel neck plate with 4 screws, round string retainer, 8 pickguard screws. Only 1 set left
email grguitars@msn.com your choice of nickel or chrome for control plate and neck plate, type of knobs.
114.95
LT-Hrdkit-NA
Dome knobs may be subbed for barrel knobs, 3/8" ferrules may be subbed for 5/16"
Email request referencing order #
Lightly aged lefty chrome/nickel hardware kit for Tele style guitar. Includes Tele bridge #TB5125-CMP-LN with 3 brass saddles, nickel vintage style 5/16" string ferrules, aged lefty kluson tuners, aged chrome control plate with screws, two barrel knobs, input cup, nickel strap buttons, chrome neck plate with 4 screws, round string retainer, aged 8 pickguard screws. Only 1 set left
157.95
GWkitT-L Tele Wiring Kit-Includes: Switchcraft 1/4" jack, 2' feet each of black and white vintage style cloth covered wire, 3-way switch w/screws-no knob, two 250K CTS pots, .047 cap. Wiring diagram. The pots in this kit are full size. If you are replacing electronics in a guitar with the small "dime" pots, you will need to either ream out the holes a little in your existing control plate, or buy a Fender replacement control plate. The mounting hole for the pots on the inside of the metal knobs that come with your guitar need to have a diameter of 1/4" for the new pots to fit.
Lefty schematic included.
23.95
TB20-L
Lefty nickel Tele Bridge, 3 nickel threaded or roller style saddles with 4 mounting screws. 2 3/16" spacing. List $28
1 left
19.95
TB5125-CMP-LN
Lefty nickel Tele Bridge, vintage style 3 brass staggered compensated saddles with 4 mounting screws. 2 1/8" spacing. Height of outside raised edge 3/8"
1 left
32.95
TB5125-CMP-LNA
Lightly aged Lefty nickel Tele Bridge, vintage style 3 brass staggered compensated saddles with 4 mounting screws. 2 1/8" spacing. Height of outside raised edge 3/8"
1 left
54.95
EPLStratk
Left handed pot wiring kit for Strat. 3 CTS 250k vintage style split shaft lefty USA pots. 1/4" Switchcraft jack, 5 way switch, 2' each of black and white cloth wire, caps, diagram. 2 left 28.95

EP4385L

Left handed vintage style 250k full size split shaft CTS pot-audio. 6 left 5.95

EP86L

Left handed 500k full size split shaft audio taper CTS pot. 6 left 4.95
Tuning machine sets
Only 6 in line tuners are specifically designed for left or right handed guitars. Neck headstocks that have 3 holes on each side use the same tuner sets as for right handed guitars. It is the nut that is cut opposite on acoustics, Gibson type headstocks and other lefty headstocks drilled with 3 tuner mounting holes on each side.
SD9105GA-L
Aged Lefty Authentic Kluson® gold replacement tuners, 6-in-line, screws & press fit bushings included. Used by Fender from 1957 to 1964. "Kluson Deluxe" is stamped on the casing in a single line.
74.95

SD91MLN R
Post to Post Spacing = 29/32 in. E to E Spacing = 4 9/16 in Length of baseplate = 5 7/8 in. Post height = 1 in.
Kluson® 6 on a plate tuners in Nickel with matching oval metal buttons. For a left-handed instrument or the Treble side strip on a right-handed 12-string instrument just like the originals but with the improved 15:1 ratio. Replacement for Gibson® 12 string, Explorer® , non-reverse Firebirds®, Trini Lopez®, Epiphone® 12 string Riviera®, etc. Use with SD91MLN L for 12 string applications.
1 only

34.95

TL815

Reamer-used for enlarging holes in necks, pickguards, etc.

11.95

Pickguards for USA made lefty Strats and Teles.
All in stock pickguards specifically for left-hand guitar are listed below-except
Looking for a reliced/distressed lefty pickguard not shown below?
We sometimes have these available on ebay-email grguitars@msn.com
.

Many of the lefty pickguards shown below are specially cut for us.
WAPG3813WL Wired lefty Strat assembly-NO pickups. Includes white 1 ply pg, 3 white knobs, full size electronics with 5 way switch & white switch tip, labor. Extra cloth wire to hook up pickups. Options: White or Black 3 ply pickguard & knobs. Other pickguard & knob colors available for add'l charge. Please email grguitars@msn.com for price & availability.
2 left
80.95

PGPB536A
Lefty lightly aged deglossed vintage Red Tortoise p bass pickguard, back is white. Truss rod notch, thumb rest screw holes-as shown. Aged pickguard screws included. Fits USA bass and some MIM. 1 only


39.95

  We list aged lefty pickguards on ebay from time to time. If you don't see what you need, check under seller ID grguitars.  

0053813A

 

 

 

 

Lightly aged white Fender Strat lefty 8 hole pickguard 1 ply for USA guitars. No shielding on back. Includes aged pickguard screws
1 only

 

34.95

 

PGS01NA
Aged nickel phillips head pickguard screws for Fender type guitars, #4 - 1/2" long.-13 pieces
4.95

PGL2humSBx
Clearance
Black 3 ply lefty 2 humbucker Strat pickguard. 11 screw holes. Measures 2 3/4" from bottom of top humbucker cutout to top of lower cutout.
1 only
9.95

PGS958Lx
Strat lefty Pickguard-Strat, Black 11 hole, 3-ply (b/w/b) Fits made in USA and MIM guitars only. Won't fit Squire
3 left
9.95

TC556-BL
5
Trem cover-Left handed 1 ply black, 6 individual string holes
Order pickguard screws from the Hardware p5 leftage
3.95
PG62W3plyLAx Aged & deglossed Lefty 62 style White Strat pickguard (W/B/W) 11 screw holes. Same screw alignment as mt green, below. Includes aged pickguard screws.
See Strat page for photos with examples of aging. 1 only
45.95
PGS990LPA
Strat lefty pickguard-Lightly aged & deglossed Parchment 3-ply (p/b/p)
See Strat page for more info on our distressed pickguards.
36.95

PGT560BL
Lefty Tele Pickguard, Black, no pickup screw holes, 5 screw holes 1 ply
1 left
10.95
PG90-BLx
3 left
Acoustic pickguard , Left-handed teardrop shape with adhesive backing-Black

2.75

PG90-TLx
3 left


Acoustic pickguard , Left-handed teardrop shape with adhesive backing-Tortoise

4.75

PG90-WPLx
2 left

Acoustic pickguard , Left-handed teardrop shape with adhesive backing-White Pearloid
4.75
PG335LL
S-335 pickguard-Black 5-ply-short version.
Pickup cutout depth about 5/8" deep- straight side is 4 3/4" long, including cutout. Overall length on inside edge is about 6 1/2" - center section of straight edge is 2 5/16" long. Length of bottom cutout is 1 3/4"

 

29.95
Tremolo Spring Covers